Ball Bearing

Ball Bearing

Deep Groove Ball Bearing

Deep groove ball bearings have high speed and are widely used as radial bearings. These non-separable bearings are available in a wide variety of seal, shield and snap-ring arrangements. Deep Groove Ball Bearings are cost-effective and maintenance free. They are basically used when axial loads from two directions have to be transmitted & there is not enough space to allow installation of matched spindle bearings and when speed is less important when compared to required guidance of the rotating parts

 Self Aligning Ball Bearings

Are You Aware About Giant Roller Bearings? Probably the first use of a bearing was back when the Egyptians were building the pyramids. They put round logs under the heavy stones so that they could roll them to the building site.  This method is still used today when large, very heavy objects like the Cape Hatter's lighthouse need to be moved.  Self aligning ball bearings are suitable for applications where misalignment can arise from errors in mounting or shaft deflection. The steel balls, cage, and inner ring can rotate freely at a certain angle, as it is stated that the bearings have self-aligning features. Accordingly, misalignment of the bearing shaft due to the machining and installation of the shaft and housing will be automatically adjusted.  Self aligning ball bearing is of the double type with a spherical raceway in the outer, Self-aligning ball bearings of series 112 and 113 have an extended inner ring. They are located on the shaft by dowel pins engaging in a slot at one side of the inner ring. If a shaft is supported by pairs of self-aligning ball bearings the slot must be in opposition to each other. The bores of series 112 and 113 bearings are made to j7 limits.

Self Aligning Ball Bearing (DOUBLE ROW)